Spin Elite Orange

This design was made by Custommadewraps and tested by Steve Wijler.

The wrap cut is exclusively available for use with Spin vanes.

The Spin Elite cut is designed to have a perfect fit for any Spin vane type vane.
It is important to know that in order for an arrow wrap to have a good solid fit to the arrow shaft, the wraps needs a bit of an overlap.
And although our wrap materials are very thin, at that point of the wrap you will have a thicker base for vanes to be attached onto the wrap.

What we have done with the design of the Spin Elite cut, is to move away the overlap from the location a vane is placed onto the wrap.
This means the wrap will still have the necessary overlap, but it will always be in between two vane locations and never underneath a vane.

Although the impact of the overlap on a standard cut is small on vane placement, the Spin Elite cut will guarantee identical vane placement for each vane.

All Spin Elite wraps come with a fixed angle for Spin vanes. This is different to the lines for Spin vanes you will see on the other wrap cuts, where you have offset lines for the angle of the vane placement.

This fixed angle is needed in order for the placement of the overlap to be correct.
You will be asked your preferred angle during the order proces. An sample angle image is attached to the product image gallery.

By placing the name in between the vanes, the wrap can be extremely short.

This can be ideal if you are looking for a light design or simply like the look of a shorter wrap.